Engineering Magazines

Here are some of the standard foreign and domestic automotive maintenance procedures that you should be sure to have done periodically:

Oil Changes: This is one of the most obvious, yet it is also one of the most frequently overlooked. Changing your oil and oil filter every three thousand miles keeps your engine running smoothly. Not changing your oil and oil filter often enough, on the other hand, can be disastrous: Over time, the additives in your engine oil break down, and the oil becomes thick and sludge-like. When this happens, the oil creates resistance on the engine, causing buildup and premature wear. Old engine oil can also cause the rubber seals in your engine to prematurely dry out and crack, creating leaks that can be quite expensive to fix.

There are a lot of quick-lube places that will change your oil quickly and cheaply, which may make you question the need to take your car to a good foreign or domestic automotive maintenance shop. However, it is definitely worth the extra money to make sure an experienced professional services your car. It is not uncommon for quick-lube shops to employ inexperienced teenagers at minimum wage, and horror stories (driving off without oil in the engine, finding months later that the oil plug won’t come out because it was stripped) abound.

Air Filter Replacement: Replacing the air filter is another important precaution that many people forget about. The silly thing is that this is also the easiest thing you’ll have to do on your car. Just as easy, if not easier, as filling the washer fluid on some cars. In fact, this one is so easy that you may not even have to get a foreign or domestic automotive maintenance shop to do it for you. Just make sure you get a high quality replacement filter. If you are not sure where it goes, ask. There will be a couple of clips you’ll have to undo to open the air filter box, but that’s about it.

Your air filter should be replaced once or twice a year. Every six months, you should at least check it. If it looks dirty, replace it. The better airflow your engine gets, the better it will perform, which to you means higher gas mileage and lower maintenance costs over time.

Basic Tune-Up: A tune-up basically involves replacing a bunch of inexpensive, quick-to-wear-out parts, and checking out a bunch of more expensive, slower-to-wear-out parts. This should be done once a year, but again, many people aren’t very good at making sure it gets done regularly.

A basic tune-up involves replacing (or cleaning and re-gapping) your spark plugs, replacing your distributor cap and rotor, and checking and/or replacing your spark plug wires. Other parts that might need to be replaced during a tune-up are your PCV (positive crankcase ventilation valve) and your oxygen sensor. All of these can affect the way your car runs, causing your gas mileage to go down and the carbon monoxide in your exhaust to go up.

Radiator Flush and Coolant Replacement: Your cooling system is a vital system. It prevents your engine from overheating, which can ruin an entire engine in mere minutes. Your cooling system therefore ought to be treated with respect, which means flushing your radiator and replacing the coolant every year or so, preferably at the end of summer or fall, before the cold weather hits.

The reason for flushing your radiator and replacing the coolant is that the Ph balance in antifreeze breaks down after a while, destroying many of its protective properties. Not only will it not cool to as low a temperature, but it will also begin to allow rust to form in your cooling system, which may lead to premature leaks in your radiator.

Be sure your replacement coolant is half water and half antifreeze. The 50/50 mixture has the lowest possible freezing temperature, the highest possible boiling point (meaning your coolant won’t boil on hot days), and will protect against corrosion inside the system.

Automatic Transmission Fluid and Filter Replacement: Many people don’t realize that their automatic transmission contains fluid and a filter that need to be replaced periodically, just like an engine. Unfortunately, neglecting this maintenance repair can result in parts in the transmission going out more quickly than they should, requiring you to overhaul or replace your transmission, which is a costly venture, to say the least.

The fluid and filter in your automatic transmission should typically be replaced about every 25,000 miles, which is less than a year’s worth of driving for most cars. The oil in a standard transmission doesn’t need to be replaced as frequently. Replacement about once every couple of years, unless you happen to do a lot of hard driving, such as towing.

Keeping up on these five preventative maintenance repairs will ensure that you maximize the life of your car. A good foreign or domestic automotive maintenance shop can help you keep track of the required maintenance, making sure that you don’t miss anything important.

Some owners keep their automobiles running like finely tuned Swiss watches. They carefully follow all of the manufacturer’s recommendations in the owner’s manual. They buy premium grade oil, order regular check-ups and rush to the repair shop when they detect any unusual noise.

However, most of us are inclined to skimp a little on maintenance and some of us never see the repair shop until the car quits. Sometimes this is due to finances but most of the time it is a matter of convenience. We need our cars to take us where we have to go and we’re reluctant to give them up even for a short period of time.

But, now that gasoline is still at astronomical prices, we need to re-think our maintenance practices. Letting some things go can cost us money in extra fuel consumption. For instance, repairing a faulty oxygen sensor can result in a 40% improvement in gas mileage. Tuning an engine can increase mileage by 4%.

You should be sure that your air filter is always clean. If your engine is fuel injected, airflow regulates the quantity of fuel that is burned. The process of mixing air and fuel is quite precise so the filter needs to be clean to ensure an efficient mixture. The air filter also protects your engine from impurities, extending the life of the engine as well as saving on gas.

It is also important to check oil regularly and change dirty oil. An engine with clean oil operates at maximum efficiency, which translates into gas savings. You should definitely use the grade of motor oil recommended by the manufacturer. Using one weight oil in an engine designed for a different weight can lower gas mileage up to 2%.

You can also realize greater efficiency from using a high-quality multi-grade oil but if there is a price difference you need to compare the costs involved.

And when your tires are not properly inflated, your gas mileage decreases by 5%. The Environmental Protection Agency estimates that millions of American cars run on tires that are not correctly inflated. Correctly inflated tires will also last longer and are safer.

The owner’s manual always states the correct pressure for the tires. If you are driving a pre-owned car with no owner’s manual, you can call a local dealer or research the information on the net.

Radial tires are supposed to improve gas mileage by 5% when driving in the city and by 7% when driving on a highway. So if you don’t already use radials, you might consider switching.

Another benefit of radial tires is that they last longer. However, you should be careful not to mix radials with conventional tires unless the owner’s manual clearly states that this procedure is acceptable for that model car.

In addition, tires need to be properly balanced. Properly balanced tires reduce road friction thereby increasing fuel efficiency.

You also need to check wheel alignment to ensure that wheels are properly aligned. Wheels that are out of alignment also cause your car to burn extra fuel.

Although the savings from each practice might be small, the overall savings is worth the extra effort.

When engine knocking is detected the knock sensor sends electrical signal to the ECU. Directionally as the compression ratio of the engine increases so does the required octane number of the gasoline if engine knocking is to be avoided. Engine knocking is in fact a pulse detonation and we all known what that can do an engine. Thus, the likelihood to engine knocking is reduced and the engine runs more smoothly. Engine knocking is the premature fuel combustion that can result in power loss of the engine. Engine knocking is compression detonation or pre-ignition of fuel in the power stroke of the engine. Engine knocking is normal for 4-stroke bike.

If you have an older car or a high performance car, you may need a higher octane gasoline to help prevent engine knocking and improve engine performance. In order to prevent engine knocking at high rpm’s, NGK’s high-spark #7 platinums are used. Before leaded gasolines were removed from the market, bromine was used in an additive to help prevent engine “knocking”. Motor mount also help prevent or at least minimize engine knocking. There was a need for improvement in the refining process for fuels that would prevent engine knocking and increase engine efficiency. This prevent engine knocking which is very common at the time of a transmission kick down. MMT is a fuel additive, which is mixed with petrol in order to prevent engine knocking. Has been used in gasoline to prevent engine knocking. Lead was originally added to prevent engine knocking. The lead compound TETRAETHEL LEAD was added to gasoline to prevent engine “knocking”.

If anything, high octane gas will help reduce engine knocking in most cars (assuming your car’s manual says it’s okay to use such a gas). Replace Air Filter – Dirty filter can reduce fuel economy by 10% or more. Ethanol in unleaded gasoline helps reduce carbon monoxide emissions by as much as 30 percent. It is oxygen-bearing additive used to reduce engine knocking and assist gasoline burn more cleanly. An antiknock agent is a gasoline additive used to reduce engine knocking and increase the fuel’s octane rating. Thereafter, the engine performance will peak and emission will reduce. Lead has also been added to gasoline to reduce engine knocking. Standard Oil began adding ethanol to gasoline to increase octane and reduce engine knocking. Lead, in the form of tetra-methyl lead or tetra-ethyl lead, is added to petrol to increase its octane rating to reduce engine knocking. Some manganese compounds have been added to gasoline to boost octane rating and reduce engine knocking.

When engine knocking is detected the knock sensor sends electrical signal to the ECU. Engine knocking is in fact a pulse detonation and we all known what that can do an engine. Thus, the likelihood to engine knocking is reduced and the engine runs more smoothly. Directionally as the compression ratio of the engine increases so does the required octane number of the gasoline if engine knocking is to be avoided.



By: zee001

About the Author: