Engineering Magazines

It is always advisable to go for used motorcycle parts than to try using fresh parts always. A large number of options are available on where to buy used motorcycle parts from. It is human tendency to buy a product with its first experience. Various shops sell used motorcycle parts after polishing and painting it properly. Such a thought will turn out to be false only in the future after some use of the used motorcycle parts in your bike. Without going for a single opinion, get the suggestion of someone who knows about the product well.

Try to check the used motorcycle parts in the light of torch. When buying the product in dark, you might feel that it is shining which will be the extra touch up given by the seller. Analyze all sides of used motorcycle parts properly, with fingers before going to buy used motorcycle parts. You can feel any crashes or cracks on the product when you touch it with your hand. There can be scratches or bents on the used motorcycle parts which will be invisible to naked eyes, but can be known with finger touch.

Ask for the age of the used motorcycle parts that you are going to buy. Even though age is not a limiting factor that determines the quality of the product, you can have a general idea of how much quality to be expected from it. There are products that will be extremely good in quality even after years of first use. A second thought is not needed in such cases. You will have to think properly if you are not satisfied with the long use of the product. This is because every part has some maximum age limit to which it can be used.

The used motorcycle parts you are looking for should be bike specific. For this to understand you will have to look in detail. A careful analyzes and the knowledge you have about used motorcycle parts will surely help you to take a decision. Even if the seller claims that it can substitute the one you are looking for, make sure that he is right.

Most importantly, the evaluation of each product will have the product related criteria to be checked. After making general checkup, understand the things you have to check in the particular product and ensure if this is satisfied. Used motorcycle parts can be specific when it comes to fitting and appearance. Ensure that wear and tear has not damaged it fully. If it is seat, make sure that prolonged use has not damaged its interiors. So a product specific check up is essential.

Though external appearance is not an evaluation criterion, it has some importance when buying used motorcycle parts. A little common sense is essential while buying used motorcycle parts. Along with the common sense, you must have some basic idea about the bike as a whole and about each part in specific. Buying used motorcycle parts might consume much time sometimes. In such cases, never make a hasty decision and end up in problem.

After you had assembled your chopper motorcycle, you are free to wash it. Wash each and every part properly which you have painted. For washing purpose, you can use any soaps or detergents which are specially made for motorcycles washing. You should not use common soap or dishwashing detergent, as they are too strong and will remove or affect the paint from your bike badly. Using a scrub or a hard brush with these soap or detergent might remove the paint.

Use of Acidic Cleaners

Always use non-acidic cleaners to wash your bike. Non-acidic cleaner does not contain any chemical like Ethylene Glycol Monobutyl Ether. Acidic cleaner or chemical cleaner have quick effect but they can also damage the paint as well as the body (metal) of the motorcycle. Most of the cleaners contain a strong chemical like Ethylene Glycol Monobutyl Ether. Therefore, make it sure before buying any cleaner that it is a non-acidic cleaner.

Recommendation

It is not a good practice to wash your chopper motorcycle with cold water, if the painted parts of your bike have been heated by any means. As it might cause the metal underneath to contract and break the bond with the paint and you will have several cracks. Use normal water and a gentle stream to avoid scratches.

Try to wash your chopper motorcycle in the late afternoon or early morning when the sun is not too bright. The sap from the tree might damage the paint of your motorcycle; therefore you should not wash it under tree. It is recommended to wash your motorcycle under the fenders. If possible remove the seat or any other leather bag attached to your bike before washing it, as water can damage the leather material. Again, it is not good to use pressure washers, as excessive water pressure will cause lost of paint.

Remove the Paint from the Engine

After assembling the motorcycle, remove the paint form the engine of your chopper motorcycle. You can remove the paint form the engine by using special Liquid cleaners. These types of cleaners are generally known as chemical cleaners. Liquid cleaners are not as aggressive as abrasive cleaners, and are quite safer and abrasive cleaners for most painted surfaces. There types cleaners are generally used for removing old wax and contaminants like spots, stain, rust, tar, and bug spattering. There are some contaminants which are not removed during the washing process. These cleaners are also come in the paste form. Generally, paste cleaners are used for heavy rust, severe scratches and real blending of the paint.

How to Apply the Cleaner

Apply the cleaner on an applicator and start rubbing the applicator on the engine of your motorcycle. But don’t apply the any cleaner directly on the painted surface of your motorcycle. You should apply the cleaner to the applicator and then fold the applicator. Mark the cleaner lightly over the applicator and then use it. Always apply small amount of cleaner at a time.

Always wash thoroughly your applicators with the mild soap and detergent. You should use liquid fabric softener or dryer sheets. The residue left on your towels can cause streaking of the paint form your chopper motorcycle. Therefore, you should keep changing the towel (used to apply the cleaner) at regular interval of time.